================================================================================
SIMPRONICS ELECTRONICS & EMBEDDED SYSTEMS
TECHNICAL DATASHEET: SENWER LITE - SMART ELECTRONIC WATER-LEVEL & ENERGY REGULATOR
================================================================================

1. PRODUCT OVERVIEW
--------------------------------------------------------------------------------
The Simpronics SENWER Lite is a microcontrolled smart water-level and energy 
regulator designed to automatically regulate water pumps for residential, 
commercial, and agricultural tanks. Featuring a digital 0.96-inch OLED display, 
capacitive touch controls, and smart telemetry, it monitors overhead (OHT) and 
underground (UGT) tanks concurrently, protecting pumps from dry-running, 
saving electrical power, and preventing water overflow.

2. ELECTRICAL CHARACTERISTICS
--------------------------------------------------------------------------------
- Input Voltage:            180V - 240V AC, 50Hz
- Relay Contact Rating:     Up to 20A Direct resistive load (max 2HP motor)
- Sensor Circuit Voltage:   5V AC peak-to-peak (prevents probe electrolysis)
- Display:                  0.96-inch Crisp Monochrome OLED (Level %, Status, BT)
- User Controls:            Capacitive Touch Keys (Power, Up, Down Navigation)
- Surge Protection:         Metal Oxide Varistor (MOV) rated at 440V / 4kV clamp
- Idle Power Consumption:   < 1.2 Watts

3. MECHANICAL SPECIFICATIONS
--------------------------------------------------------------------------------
- Enclosure Material:       Durable Flame-Retardant ABS Plastic Body
- Front Panel:              High-Gloss Scratch-Resistant Toughened Glass
- Protection Rating:        IP54 Dust & Splash Protection
- Dimensions:               120mm (W) x 78mm (H) x 57mm (D)
- Mounting Type:            Wall-Mount with integrated side screw flanges

4. PIN CONFIGURATION & WIRING DETAILS
--------------------------------------------------------------------------------
- Pin 1-2:   AC Mains input (Phase & Neutral, 230VAC)
- Pin 3-4:   Motor Output relay terminals (Heavy-duty 20A SPDT)
- Pin 5:     Underground Tank Common (UGT-C)
- Pin 6:     Underground Tank Low Level (UGT-L)
- Pin 7:     Underground Tank High Level (UGT-H)
- Pin 8:     Overhead Tank Common (OHT-C)
- Pin 9:     Overhead Tank Low Level (OHT-L)
- Pin 10:    Overhead Tank High Level (OHT-H)

5. OPERATING PRINCIPLES
--------------------------------------------------------------------------------
- Pump triggers ON when:   UGT has sufficient water AND OHT water level falls below OHT-L.
- Pump triggers OFF when:  OHT water level reaches OHT-H OR UGT water level drops below UGT-L.
- Dry-Run Protection:      If pump is ON but sensor OHT-L does not detect water within 
                           180 seconds, controller enters dry-run lockout mode.
- Energy Regulation:       Optimized pump duty cycle prevents motor overheating and reduces
                           unnecessary starts.

6. COMPLIANCE & SAFETY WARNINGS
--------------------------------------------------------------------------------
- Do not route sensor wires alongside AC power lines to prevent signal interference.
- Always isolate mains AC before touching terminal blocks.
- RoHS compliant. CE certified design.

Designed & Engineered in India by Simpronics.
For technical support & inquiries: sales@simpronics.com | +91 9274789018
================================================================================